Mold Release Agent

Apr 22, 2023

We Are Factory, Develp And Produce Kinds Of Chemical Agent And Additive For Rubber Product, To Solve Problem In Process Of Rubber Product, Such As Tire, Tube, Etc.

Contact us

Wechat/WhatsApp:+8613518628501

Email:edward@fihonor.com

Product Details:

Batch-off Release Agent PRP-75C

Description

Release Agent PRP-75C is a powder batch-off release agent. It prevents the adhesion of uncured rubber and milled sheets during storage. Release Agent PRP-75C consists of inorganic fillers and active substances. Release Agent PRP-75C shows good wetting and release properties for all types of rubber independent of softness and stickiness. Release Agent PRP-75C is well tolerated by the rubber and there is no influence to flow behavior or other properties during vulcanization.

Application fields

Release Agent PRP-75C is as a powder batch-off release agent suited for all kinds of elastomers.

Usage:

For Release Agent PRP-75C we recommend a concentration of approx. 3.5%± 1%,depending on the air temperature of mixer workshop, rubber composition and shore hardness of the rubber mixture. High concentration is usual applied for sticking rubber or in summer, whereas low concentration. Release Agent PRP-75C forms thin, flexible film on the surface of milled sheets. The film has good release properties and prevents the formation of dust, which means that it does not cause any problems during subsequent processing. Release Agent PRP-75C only forms slight, soft-deposits on the equipment and these can be easily removed. The product has anti-corrosive properties. There is no troublesome foam formation when it disperses in water.

Technical Data

Composition: combination ofinorganic fillers and active substances

Appearence:greyish powder

PH(3%): 8-11

Ash content: approx.60%(950'C)

Solubility: disperses in water, no deposits in short time.

Packing: 20kg, complex paper bag,1ton/pellet Safety and Transport

Release Agent PRP-75C is not classified as a dangerous good according to transport legislation, so we should transport it in term ofundangerous good. It has not any hurt if you use it in right way.

Storage

Release Agent PRP-75C should be stored under cool and dry conditions. Ifthese rules are obeyed, the product can be stored for at least one year. The production date is stated on the lot on the labels of each sack.

Special declaration

Product’s technical information and data are based on the best information available and does not constitute or imply a warranty or patent infringement of any kind. The user is responsible for testing product suitability before to use the production.