Bladder Coating Agent

Apr 29, 2023

Basic Info:

Bladder Coating Agent SBC-956

Description

Bladder Coating Agent SBC-956 is a semi-permanent tire bladder coating agent. The active ingredi- ent is a reactive silicone polymer. The product provides an excellent slippage of the bladder into the green tire and a very good release eflect after the cure. After the cure the inside ofthe tire is clean smooth and dry. The inner liner splice is not effected because the active ingredient does not show the negative seperation effects normally observed with regular silicone oil. Low consumption and a short drying time make the product very economicalBladder Coating Agent SBC-956 does not give any stains or marks if accidently applied on the tire outside.

Application fields

Semi-permanent bladder coating agent for passenger car tire, off-the-road tire and rubber product.

Usage

At first, the bladder has to be cleaned to be sure there are no residues left that might impair the coating. Bladder coating agent SBC-956 is then applied by wiping it directly on the new bladder in an undiluted form. Afterwards you should give enough time for the coating to dry and to bond on the surface of the bladder. At the time of cure, bladder coating agent SBC-956 can be sprayed on the surface of the bladder using atomizing or airless spray systems. The suspension has virtually no tendency towards sedimentation. However, we recommend to stir the product gently during processing.

Technical Data

Composition: aqueous emulsion of reactive silicone polymers

Appearence white, medium-viscosity liquid

PH:4~7

Active substance content[%]: ~20%(4h/105°C)

Packing: 20kg plastic drum, 50kg plastic drum

Safety and Transport

Bladder Coating Agent SBC-956 is not classified as a dangerous good according to transport legislation, so we should transport it in term ofundangerous good. There is a smell of acetic acid, so it has antiseptic eflect. It has not any hurt if you use it in right way.

Storage

Bladder Conting Agent SBC-956 has to be protected from frost, heat and direct sunlight. If these rules are obeyed, the product can be stored for six months. The production date is stated on the lot number on the label ofeach container.

Special declaration

Product’s technical information and data are based on the best information available and does not constitute or imply a warranty or patent infringement ofany kind. The user is responsible for testing product suitability before to use the production.